Description
RIKESHIELD Platinum has excellent heat rejection properties compared to other Window Tint Films.
Most impressive is the film’s fast cooling properties. You won’t need to wait long for your vehicle to cool down even after parking under the sun. Just drive off and your cabin cools off quickly.
Introducing RIKESHIELD Platinum – High-Performance Solar film from renowned Japanese OEM.
Superior Heat Rejection
Enjoy faster cooling times, so you can drive off in comfort without the wait.
Regulation-Compliant Safety
Designed for high performance while adhering to all legal requirements for road use.
Seamless Compatibility
Engineered for full functionality of modern vehicle sensors and navigation.
Premium Heat Management
Enjoy unparalleled temperature control without compromising visibility or aesthetics.
Front Half Characteristics
- 65% Visible Light Transmittance
- 99.6% Ultraviolet Radiation
- 47% Solar Energy Rejection
- Film Thickness (2.0 MIL)
- 95% to 98% Infra-radiation Heat Rejection after film is applied on Glass
Rear Half Characteristics
- 35% Visible Light Transmittance
- 99.6% Ultraviolet Radiation
- 53% Solar Energy Rejection
- Film Thickness (2.0 MIL)
- 95% to 98% Infra-radiation Heat Rejection after film is applied on Glass
Frequently Asked Questions
Car Care
Wait 48 hours after installation to wash your vehicle. Remove insect or other stains as soon as possible. Avoid using a pressure washer or high-pressure water source near the edges of the film, it can cause the film to lift and/or become damaged.
Film Care
Stubborn stains can be removed with 99% isopropyl alcohol. Take care to keep these chemicals off the vehicle’s paint. Light scratches in the film will self-heal in 20-30 minutes at room temperature. In colder conditions, or to accelerate the process, pour warm water (120°F) over the affected area. Detailing Clay can be used to remove contaminants that are on the film
Is the film permanent?
Film uses a unique adhesive that keeps the film adhered tightly to the windows but is not permanent. Recommended to remove on 3rd/4th year due to very sunny weather. The film adhesive may be difficult to remove in due course.
How to replace the film?
The film should only be removed by RIKESHIELD specialists to reduce risk of damaging surfaces. Any adhesive remaining on the window can then be removed with a special cleaner designed to remove adhesive. New RIKESHIELD film can then be installed on the cleaned surface.
Reviews
There are no reviews yet.